Fans RVK

The RVK 100 A1 fan can be connected and installed into your grow room ventilation system easily in whatever position you need it in as it comes with mounting brackets included. We recommend using the RVK 100 A1 as a grow room intake or inlet fan and using one of the Systemair’s sealed fans as your grow room extractor fan, but the RVK 100 A1 is adaptable and can work as you need it to your grow room environment. It can even be coupled to our DiffuseAir to offer a total ventilation system.

The RVK 100 A1 fan is a 4 inch or 100mm fan, offering low wattage with high output offering a maximum air flow of 184 m3/h. While it runs very quietly anyway, it can be easily attached to a silencer to further reduce noise. If using it as part of your grow room extraction set up, as it’s an inline fan it can be easily connected to a carbon filter. Each RVK fan is speed controllable with triac or voltage. As an inline fan, the RVK 100 A1 is built to be directly installed into ventilation set ups – it doesn’t come wired but is easily done with a length of 3 core cable and a standard 3 pin plug.

Made by industry leaders Systemair in Germany, the RVK fan range has been experienced growers’ choice of fan for years due to their excellent reputation. RVK fans are powerful, quiet, low cost and virtually indestructible – the RVK 125 A1 will run 24/7 with no problem, for years of continuous use.

The RVK 125 A1 is a versatile inline fan and can be connected into your grow room ventilation set up in any position as it comes with mounting brackets included. We suggest using the RVK 125 A1 as an inlet or intake fan for your grow room and using a powerful, sealed Systemair fan for your grow room extractor fan. However, the RVK 125 A1 is very adaptable and will work as you need it as any part of your grow room ventilation system – it can even be coupled to the DiffuseAir to offer complete ventilation to your indoor environment.

The RVK 125 A1 can easily be attached to a carbon filter if needed. While it runs very quietly for its size and power, you can further reduce noise by attaching a silencer.

All RVK fans are speed controllable with triac or voltage. They don’t come wired as they’re inline fans built to be directly installed into your ventilation system but are easily wired with a length of 3 core cable and a standard 3 pin plug.

The RVK 125 A1 is a low wattage fan offering high output – delivering a maximum air flow of 220 m3/h.

Made in Germany by industry leaders Systemair, the RVK fan range has been the go-to fan for experienced growers for decades due to their unbeatable reputation. RVK fans are quiet, powerful, low cost and practically indestructible – the RVK 125 L1 will last years of running all day every day with no problems.

The RVK 125 L1 can be set up anywhere you need it in your grow room ventilation system as it comes with mounting brackets for ease of installation. We recommend using the RVK 125 L1 as a grow room intake fan and using one of Systemair’s other sealed fans for your grow room extractor fan – however, the RVK 125 L1 is very versatile and will work wherever you need it in your grow room ventilation set up – you can even couple it with our DiffuseAir for a total ventilation system for your indoor environment.

The RVK 125 L1 is easily attached to your other ventilation kit like carbon filters or silencers for a very quiet grow room. The RVK 125 L1 is low wattage and high output, capable of a maximum air flow of 323 m3/h.

All RVK fans are speed controllable with voltage or triac. RVK fans don’t come wired, but it is easily done with a length of 3 core cable and 3 pin plug.

The RVK 150 A1 comes with a mounting bracket included, so it can be easily installed wherever you need it into your grow room ventilation system. We recommend using the RVK 150 A1 as a grow room intake fan and using a Systemair sealed fan as your grow room extractor fan, but the RVK 150 A1 is versatile and can work however you need it to in your grow room – you can even couple it to the DiffuseAir for a total grow room ventilation set up.

The RVK 150 A1 is a 150mm or 6 inch fan, offering low wattage with high power, capable of delivering a maximum air flow of 428 m3/h. It’s easily connected to carbon filters if being used as part of your grow room extraction, or a silencer if you want extremely low levels of noise in your grow room. All RVK fan speeds are easily controlled with triac or voltage. As inline fans, they’re built to be directly installed into your ventilation set up and are easily wired with a length of 3 core cable and a 3 pin plug.

The RVK 150 L1 can be easily installed wherever you want it in your grow room ventilation set up as it comes with a mounting bracket included. We suggest using the RVK 150 L1 as your grow room inlet fan and using another sealed Systemair fan as your grow room extraction fan – however, the RVK 150 L1 is very adaptable and can work however you want it to in your grow room ventilation system. It can be paired with the DiffuseAir for a complete ventilation set up.

The RVK 150 L1 is low wattage and high output, delivering a maximum air flow of 720 m3/h. It runs very quietly for how powerful a fan it is, but if you want a stealthy grow room then silencers can be easily attached. Likewise, if you use the RVK fan as your extraction fan, it can be easily connected to a carbon filter for odour removal. All RVK fans are speed controllable with voltage or triac. The RVK 150 L1 is built to be installed directly into your grow room ventilation system and is easily wired with a length of 3 core cable and 3 pin plug.

Install the RVK 200 A1 with ease wherever you need it in your grow room with the mounting brackets included. We suggest the RVK 200 A1 is best used as a grow room inlet or intake fan and using another sealed Systemair fan like the K Fan as your grow room extraction fan. However, the RVK fan is very versatile and can work as you need it to in your grow room – you can even pair it with a DiffuseAir for a complete ventilation system.

The RVK 200 A1 is a 200mm, or 8 inch fan, that offers high performance with low wattage, capable of delivering a maximum air flow of 796 m3/h. Though it runs quietly as standard, the RVK 200 A1 can be easily attached to a silencer to further reduce noise, as well as easily attached to other ventilation equipment like carbon filters. As an inline fan, RVKs are built to be directly installed into ventilation set ups and can be easily wired with a length of 3 core cable and standard 3 pin plug. RVK fans are speed controllable with triac or voltage.

Use the mounting brackets that are included to install your RVK 200 L1 with ease wherever you need it in your grow room. We recommend using the RVK 200 L1 as a grow room intake fan and using a sealed Systemair fan for your extractor fan. This being said, the RVK is very adaptable and will work as you need it to wherever you want it in your grow room – it can even be coupled with our DiffuseAir to offer a total ventilation set up.

Offering high power with low wattage, this 8 inch fan is capable of delivering a maximum air flow of 1008 m3/h. It can be easily attached to whatever other ventilation equipment you want, such as silencers to lower noise levels or a carbon filter if you’re using it in your grow room extraction set up. The RVK 200 L1 is an inline fan, made to be directly installed into ventilation systems. It’s easily wired with a standard 3 pin plug and a length of 3 core cable and is speed controllable with triac or voltage.

The RVK 250 A1 is a low wattage, high output fan – delivering a maximum air flow of 860 m3/h and performing well under pressure. RVK fans can be easily attached to other ventilation equipment like carbon filters to remove odours or silencers to reduce noise levels. As an inline fan the RVK 250 A1 is built to be installed direct into your grow room ventilation set up, it’s easily wired in with a length of 3 core cable and a 3 pin plug and fan speed can be controlled with voltage or triac.

The RVK 250 A1 comes with mounting brackets included, so you can install your fan wherever you want in your grow room with ease. We suggest the RVK 250 A1 is used as a grow room intake fan and to use a Systemair sealed fan for your extraction fan. However, the RVK fan range is versatile and will perform as you need it to in your grow room and can even be paired to the DiffuseAir for a complete ventilation system.

RVK fans have been an essential part of grow room ventilation for years because of their low cost compared to the power they can deliver, as well as the fact that they’ll run continuously for years with no issues.

The RVK 250 L1 is a high performance 10 inch fan that is low wattage – capable of a maximum air flow of 1080 m3/h, and still performs well when the usual pressures of a grow room environment are in play. RVK fans are easily connected to other grow room ventilation equipment like silencers to reduce noise, or carbon filters to remove odours. The RVK 250 L1 can be wired in with a length of 3 core cable and a standard 3 pin plug and be installed directly into your grow room ventilation system. Fan speed can be controlled with voltage or triac.

The RVK fan range has mounting brackets included so you can install your fan wherever you need it in your grow room with no hassle. We recommend using a sealed Systemair fan for your grow room extractor fan and using the RVK 250 L1 as your grow room intake fan, but RVK fans can perform as either – you can even couple it with one of our DiffuseAir fans for a total ventilation set up. 

Powerful, inline duct fans – RVKs have been a staple in grow rooms for years due to their low cost, high power and shelf life. RVK fans will run 24/7 for years without any issues.

The RVK 315 A1 comes with mounting brackets included, so wherever you want your fan in your grow room, you can install it hassle free. We suggest you use a sealed Systemair fan as your extraction fan and the RVK 315 A1 as your intake fan, though RVK fans can perform as either – they can also be paired up with a DiffuseAir for a complete ventilation system.

RVK fans are easily connected to other grow room ventilation equipment like carbon filters to remove odours or silencers to reduce noise. RVK fans can be wired in easily with a length of 3 core cable and standard 3 pin plug, to be installed directly into your grow room ventilation system. They’re speed controllable with triac or voltage.

The RVK 315 A1 is a 12 inch inline fan (315mm) that is low wattage and high output, delivering a maximum air flow of 1361 m3/h as well as still performing incredibly well under pressure.